Neverside

thats a good one ^^ i like that place:)

___________________

Do You know that it is anatomically impossible to lick your elbow?...
and 75% of the people who just read that actually try to do it

ok i have alot of free time so i think ill give a little tult on how to install a motherboard for yah.....
if i missed any important information i have let out:)

How to install The CPU
Level: Easy

1. Take the new motherboard out of the antistatic bag that it came in and set the new board on the bag.
2. Install the processor.There are two procedures-one for socketed processors and the other for slot-based prosessors.
Slot-based processors are out dated so you really dont need to worry about them b/c im just going to tech you how to install a soketed so dont worry..

Now lets get started!!!!
Find pin 1 on the processor;it usually is denoted by a corner of the chip that is marked by a dot or bevel.Next , find the corresponding pin 1 of the ZIF socket for the cpu on the motherboard; it also is usually marked on the board or with a bevel in one corner of the soket.Be sure the pins on the processor are straight and not bent; if they are bent then the chip well not fit in right into the soket. If you do bend it then you may use small needle-nose pliers to carefully straight out the bent pins.Insert the cpu chip into the ZIF socket by lifting the release lever until it is vertical.Then align the the pins on the processor with the holes in the socket and drop it down into place.If the processor does not seem to want to drop in all the way then remove it to check for the proper alignment and any posible bent pins.When the processor is fully seated in the socket. Push the locking lever on the socket down until it laches to secure the processor.

Then install the mb in the case and turn it on and have fun!!!!!!

___________________

Do You know that it is anatomically impossible to lick your elbow?...
and 75% of the people who just read that actually try to do it

Don't forget http://tomshardware.com guys....

___________________

Bmovies are BACK!

Where to buy:
www.newegg.com
www.zipzoomfly.com

Custom PC Vendors
www.Alienware.com
www.ibuypower.com
www.cyberpowersystem.com
www.falcon-nw.com
www.voodoopc.com

___________________

Neverside Sucks.

also
www.tigerdirect.com FOR P.C hardware
www.apple.com mack hardware

___________________

Do You know that it is anatomically impossible to lick your elbow?...
and 75% of the people who just read that actually try to do it

Last edited by goku, September 25th, 2004 09:40 AM (Edited 1 times)

When trubleshoting for hardware problems, as a last resort, try to replace the part with a part you know is working, thus determining if you have a bad peace of hardware.

Only use this as a laste resort though, you could have something not hooked up right or there may be another problem ells ware.

___________________

People without self-doubt scare me.
The world is my country, science is my religion. - Christiaan Huygens
“Don’t take refuge in the false security of consensus.”

Home||Truth|Love

General Knowledge:
http://www.tech-faq.com/
Great site.

How to build your own PC

http://www.pcmech.com/byopc/index.htm

___________________

People without self-doubt scare me.
The world is my country, science is my religion. - Christiaan Huygens
“Don’t take refuge in the false security of consensus.”

Home||Truth|Love

Yah thats alil better than what i was going to do

___________________

Do You know that it is anatomically impossible to lick your elbow?...
and 75% of the people who just read that actually try to do it

Tigerdirect IS the cheapest computer hardware retailer on the web. Definitely.

If you are putting together your own computer I highly suggest you buy the parts from there.

___________________

Originally posted by blackmesa:

Okay! thats the last time i search up goatse on google